Saves Time and Energy
Use Total Decon before you clay to pull out contaminants and leave less work for the clay. Less clay also means less scratches to remove after.
Pulls Out Deeply Embedded Iron
Total Decon breaks down and pulls out any iron particles it comes in contact with, whether it’s brake dust from the road or rail dust from trains.
Eliminates Industrial Fallout
Cars in urban areas are riddled with iron and other particles due to nearby industrial activity. With Total Decon, you can get them all out and start fresh.
Helps Prevent Paint Oxidation
Iron particles embedded in the finish rust (oxidate) over time, eating through it until holes appear. Total Decon stops this by removing iron before it oxidates.
Preps For Nanocoating
When applying nanocoatings like Nano-Resin, deep contamination must be removed or it will be locked in. Use Total Decon to get it all out first.
Total Decon rapidly removes contamination to keep the detail going at a steady pace. With the time you’re saving, you’ll be polishing in no time.
How Does It Work?
1. Holding bottle six inches away, spray a panel or small area evenly until surface is covered.
2. Let sit for 30 seconds to a minute.
3. Wipe away with a microfiber towel.
4. Repeat steps 1-3 until all desired surfaces have been decontaminated.
Dr. Beasley's Suggests
Multiple applications and longer dwell time may be necessary.
Compatible with glass and headlights.
Do not apply in direct sunlight.
For best results, protect with Dr. Beasley’s Nano-Resin MX or Nano-Resin Pro after decontamination to prevent future contamination.
Always test in an inconspicuous area first to check for surface compatibility.