No silicone oils, wax or fillers — 100% body shop safe.
Lays adhesion points for durable coating bond.
Protects paint to resist scratches before coating.
Sphere-shaped to deliver smooth & reflective surface.
Precision sized at .45 microns to remove lighter defects.
Maximized cutting facets produce better results faster.
DESIGNED FOR CERAMIC COATINGS
No organic content to ensure stable surface for coating.
Optimizes bond with adhesion matrix of anchor points.
Produces smooth surface to enhance coating gloss.
How it Works
NSP 45 finishes paintwork with light abrasives to enhance gloss, remove minor defects and optimize for bonding prior to applying a ceramic nanocoating. For paintwork correction, use NSP 45 as the last step in the NSP system before coating. For lighter paintwork enhancements, NSP 45 can be used alone before coating.
Nano Surface Primers enhance and optimize your current paintwork protection procedures. You may require less product and less time to achieve your desired results. Be sure to test and experiment with NSPs as you use them to develop a feel for what machine settings and pads work best for you.
1. Prep vehicle. For best results, wash with Dr. Beasley’s Premium Body Wash, decontaminate with Dr. Beasley’s Total Decon, Dr. Beasley’s Clay Spray and clay bar. Tape off crevices and sensitive areas.
2. Tape off a section of the hood or any other flat panel. Visually inspect paint using a powerful light to determine severity of defects.
3. Based on your inspection, conduct 5-7 section passes using the least aggressive NSP and pad combination required to deliver the desired results. (For deep scratches, start with NSP 150. For fine scratches and oxidation, use NSP 95. For light micro marring and finishing, use NSP 45)
3A. Inspect again. If desired results were achieved, conduct another 5-7 section passes using the next NSP down in terms of aggressiveness, matching pad as necessary. Finish with NSP 45 and wipe the panel twice with a dry microfiber towel. Repeat steps going one small area at time until all paintwork has been buffed to desired results.
3B. If desired results were not achieved, conduct another 5-7 section passes using the next NSP up in terms of aggressiveness, matching pad as needed. When desired results are achieved, continue with 5-7 section passes using the next NSP down in terms of aggressiveness. Finish with NSP 45 and wipe the panel twice with a dry microfiber towel. Repeat steps going one small area at time until all paintwork has been buffed to desired results.
4. Wipe all panels again with a dry microfiber towel and continue to ceramic coating application. No IPA wipe or wait time is required beforehand.
Pad & Machine Recommendations
Nano Surface Primers are compatible with most pads and machines. If you are unsure whether a machine or pad is compatible, follow the above instructions and test on a small area before proceeding to the rest of the vehicle.
Dr. Beasley’s Suggests:
Not every job will need all three Nano Surface Primers, so always perform a test panel first to determine the necessary NSP combination for the paintwork’s correction needs.
Do not use in direct sunlight.
For best results, follow with a Dr. Beasley’s ceramic nanocoating system.
NSPs are compatible with other coating brands.
There are no reviews yet.